Jack JK-9820-02 Electronic Keyhole Eyelet Sewing Machine Comes With Complete Fully Assembled Tabling and Built-In Direct Drive Motor

Complete Package: Machine Comes with Table and Stand Fully Assembled

Electronic eyelet button hole machine to sew eyelet buttonholes on jeans, trousers, shirts and much more.

MACHINE APPLICATIONS:

• Eyelet Keyhole-Button Sewing for Making Jeans
• Sewing Eyelet-buttonholes on Trousers, Pants
• Making Coats, Jackets, or any wearable requiring a Keyhole-Button

MACHINE FEATURES:

• Flat-bed design with direct drive motor
• Accurate pattern making at very high speeds, allowing a faster rate of production
• Very reliable machine and self-lubricating
• Large operating 120mm space

Thread Clamp Structure

Optimizes the locking of the thread and avoids problems at the start of the seam.

Noise Reduction

Special machining on gears and camshafts to reduce vibrations and noise (80dB reduction).

Accurate Stitching

The machine controlled by the servo-motor makes sewing precise even at high speed. The control system allows you to always maintain the initial position.

Stitch Jump Reduction

Once the hooks and other mechanical parts have been optimized, the machine can sew with lighter thread tension thus reducing stitch skipping and thread breakage.

LCD Display With Icons

The cutting length and the position of the blade can be precisely adjusted.

Air System

Improved air attacks to make connections faster and stronger.

Big Operation Space

The 120mm machine body space is suitable for different types of fabric and garment types, especially suitable for sewing multiple holes.

Advanced Thread Trimmer

2mm short thread cutting, can sew large models for both casual trousers and jeans.

MACHINE SPECIFICATIONS:

• Needle Thread Trimmer: Short Thread Trim
• Bobbin Thread Trimmer: Short Thread Trim
• Main Applications: Jeans, Trousers, Suits, Dresses, and Casual Clothing
• Functions: Trimming both Needle (Upper) Thread and Bobbin (Lower) Threads. No manual trimming required.
• Sewing Length: 22-30mm, 14-22mm, 18-26mm, 26-34mm, 34-42mm
• Standard Presser Foot Length: 30/26mm
• Standard Hammer Length: 24/20mm
• Accessorial Hammer Length: 28/24mm
• Sewing Speed: 1000 to 2500 Stitches per Minute
• Needle Code: 0.5-2.0mm
• Needle System: DDx55B NM: 80 to 120
• Zig-Zag Sewing Width: In most conditions, it is between 3.0mm to 4.0mm to 5.0mm at most
• Stream Thread Length: 0mm to 20mm
• Work Clamp Height: 16mm
• Start-off Mode: Double Pedal Switch
• Fabric Feeding Device: Intermittent Cloth-sending of 3 Pulse Motors (X,Y)
• Safety Device: If there are any problems, the computer automatically actions the urgent stop circuit to stop the machine immediately.
• Upper Shaft Motor: WAC Servo-motor 550W
• Air Pressure: Main Regulator 0.5 MPa, Hammer Pressure Regulator 0.4 MPa
• Air Consumption Volume: 43.2 Liters per Minute (8 Cycles/Minute)
• Weights: Machine Head = 120 Kg, Operation Board = 0.6 Kg, Control Box = 14.2-16.2 Kg
• Dimensions: 123mm x 83mm x 144mm
• Power: Single Phase 100V/200V or Three Phases 200V/220V/380V/400V or 400VA